Comparison · For fire risk assessors
Quickler guide · Quickler Ltd

FireCheckr is a fire risk app. Quickler does the write-up.

FireCheckr turns voice notes on site into a first draft of a fire risk assessment, in its iPhone and Android apps, from £19.50 a report. Quickler does the same job in WhatsApp with no app, for any inspection, in your own Word or PDF report. We make Quickler, so we also say where FireCheckr is the better choice.
IN SHORT

FireCheckr and Quickler both take the write-up off a fire risk assessor. We make Quickler, so read this with that in mind. Every fact about FireCheckr comes from its own website, checked on 18 November 2026, and we say where it is the better choice.

14-day free trial. No card needed to start. No contract, cancel any time.
The short version
  • FireCheckr is AI voice capture for fire risk assessments, in an app, from £19.50 a report (firecheckr.co.uk, 18 November 2026).
  • Quickler does it in WhatsApp with no app, for any inspection, in your own Word or PDF report.
  • Graeme Clark at Ethos Safety: write-up down from 1 to 2 hours to 14 minutes on average.
  • Fewer than about 4 reports a month, fire only: FireCheckr is probably cheaper. From about 4: Quickler.
Hours back, on every report.

Both tools aim at the same hours: the write-up after the walk. At Ethos Safety, Graeme Clark, a health and safety consultant, went from 1 to 2 hours of write-up to 14 minutes on average. FireCheckr's own site quotes its customers on the same saving. The question is which way of working suits you.

Three differences that matter.
Count your reports a month.
Count the reportsStep 1

Fewer than about 4 a month, all of them fire risk assessments? Paying per report is probably cheaper. Four or more, or other kinds of inspection too? A flat price starts to win.

Try it on a past jobStep 2

FireCheckr offers a 7-day free trial on your own past job. Quickler has a 14-day free trial, no card needed. Try both on the same walk and time them.

See how long your next report takes.

Walk round, talk on WhatsApp, and see the report done. No new app. Set up in under a week.

What FireCheckr isWhat FireCheckr is

From its own site (firecheckr.co.uk, checked on 18 November 2026): FireCheckr is "AI fire risk assessment software for UK assessors". You record notes on site with AI Voice Capture and it creates a first draft of your report in your own template. The iOS and Android apps let you talk, type and photograph as you walk the building. It mentions PAS 79-1 and BS 9792.

It charges "from £19.50 per report" at the standard rate, with volume discounts for larger consultancies; its site does not say whether that includes VAT. It offers a 7-day free trial, set up for you within 1 hour, on a past job. The CRM and client portal are priced separately. Reports, clients and photos are exportable at any time, and it shows six named customer stories.

When FireCheckr is the better choiceFair to them
  • You only write fire risk assessments, and want a tool built around them, with PAS 79-1 and BS 9792 named on its site.
  • You write fewer than about 4 reports a month. At £19.50 a report, 2 reports cost £39 a month, less than £75.
  • You want a CRM and client portal from the same company (priced separately).
  • You prefer a dedicated app on your phone to a chat.
  • You want a trial on your own past job before you commit. Both tools offer a free trial; FireCheckr says it sets yours up within 1 hour.
What Quickler does differentlyWhat Quickler does differently

1. No app. The person on the job messages in WhatsApp by text, voice note or photo, in any order. Quickler puts each answer under the right question and asks only about what is still missing.

2. Any inspection, not only fire. You set the questions from your own method. We do not sell a ready-made PAS 79-1 or BS 9792 template; instead Quickler fills your own. A fire risk assessor already uses it with their own PAS 79-based report layout. If you also do COSHH, care home audits or site checks, they run the same way.

3. Your own Word or PDF report. Send the report you already issue and every new Record comes back in that layout. FireCheckr also does own-template output, so this is not a gap between us; the app is.

4. Time saved. Graeme Clark, an H&S consultant at Ethos Safety, went from 1 to 2 hours of write-up to 14 minutes on average. You still check and edit every word before it goes out.

When Quickler is the better choiceFair to us
  • You do fire risk assessments and other inspections, and want one way of working.
  • You write 4 or more reports a month.
  • You do not want an app on your phone, or your team will not install one.

The honest limit: Quickler is less flexible on templates than a drag-and-drop builder, and you bring your own questions.

Prices, for referencePrices, for reference

Quickler is £75 a month per phone number, or £750 a year (two months free). Reports, photos and messages are unlimited. 14-day free trial, no card needed.

The sums: 4 reports at £19.50 is £78 a month, so £75 a month is cheaper from 4 reports (the break-even is 3.85). On the yearly plan, £750 is £62.50 a month, which is cheaper from about 3.2 reports a month. At 2 reports a month, per report costs £39, so FireCheckr is cheaper.

FireCheckr figures checked on 18 November 2026 against firecheckr.co.uk. Its site does not say whether £19.50 includes VAT, so check the price you are quoted. Volume discounts are not published.

Questions, answeredTranscript